English - 7
Privacy mode
To activate privacy mode on a call in progress, press
MEnU/sElECT
twice. As long as privacy mode is on, you’ll see
a in the display, and no other handsets can join your call. Privacy mode turns off automatically when you hang
up; you can also turn it off by pressing
MEnU/sElECT
twice.
Call transfer
To transfer a call
To answer the transfer
1. During a call, press
hold/ClEar/inTErCoM
. The phone puts the call on hold.
2. Select the handset you want to page, or select
All
. (To cancel and return to the
call, press
Talk/flash
.)
3. When the other handset accepts the call, you’ll be disconnected. (press
Talk/
flash
to rejoin the call.)
1. Press
hold/ClEar/inTErCoM .
Speak to the other handset.
2. Press
Talk/flash
to speak to
the caller.
Intercom
x
Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line.
x
You can make an intercom call from any handset, but only two handsets can be in an intercom call at any time.
x
If an outside call comes in during an intercom page, the phone cancels the page so you can answer the incoming call.
x
If an outside call comes in during an intercom call, press
Talk/flash
to hang up the intercom call and answer the
outside call.
x
To end an intercom call, press
End
. Both handsets return to standby
To page another handset
To answer the page
1. With the phone in standby, press
hold/inTErCoM/ClEar
.
2. Select the handset you want to page, or select
All
. (To cancel, press
End
.)
Press
Talk/flash
or
hold/
ClEar/inTErCoM
.
Voice Message Notification
x
If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting.
x
This feature supports Frequency-Shift Keying (FSK) message notification. Contact your voice mail provider for
information.
x
You can store the access number in your phone and dial from the menu.
Programming your access number
1. With the phone in standby, open the menu and select
Global Setup
.
2. Select
Edit Voice Mail
, then enter the access number (up to 20 digits) from your voice mail service. When
you’re finished, press
MEnU/sElECT
.
New message notification
x
When you have new messages, the voice message icon appears in the display, and the
STaTuS
light on the handset
blinks.
x
To access your mailbox, open the menu when the phone is in standby. Select
Voice Mail
. The phone dials the access
number exactly as you entered it.
x
After you listen to your messages, the voice message icon turns off. If it doesn’t, you can reset it: With the phone in
standby, open the menu and select
Global Setup
; select
VMWI Reset
, then select
Yes.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, try these simple steps first. If you need help, call our Customer Care line
listed on the front cover.
General problems
Possible solutions
No handsets can make or receive calls.
x
Check the telephone cord connection.
x
Disconnect the base AC adapter for a few minutes, then reconnect it.
A handset can’t make or receive calls.
x
Move the handset closer to the base.
A handset can make calls, but it
won’t ring.
x
Make sure the ringer is turned on.
