English - 25
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio com-
munications. However, there is no guar-
antee that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
x
Reorient or relocate the receiving
antenna.
x
Increase the separation between the
equipment and receiver.
x
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
x
Consult the dealer or an experienced
radio/TV technician for help.
FCC RF Exposure Information
This product complies with FCC radia-
tion exposure limits under the following
conditions:
x
The base must be placed to allow a mini-
mum of 20 cm (8 inches) between the
antenna and all persons during normal
operation.
x
The base must not be collocated or
operated in conjunction with any other
antenna or transmitter.
x
The handset is designed for body-worn
operation and meets FCC RF exposure
guidelines when used with any belt clip,
carrying case, or other accessory sup-
plied with this product. (All necessary
accessories are included in the package;
any additional or optional accessories
are not required for compliance with
the guidelines.) Third party accessories
(unless approved by the manufacturer)
should be avoided as these might not
comply with FCC RF exposure guide-
lines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specifications. This
is confirmed by the registration number.
The abbreviation
IC
before the registra-
tion number signifies that registration
was performed based on a Declaration
of Conformity indicating that Industry
Canada technical specifications were
met. It does not imply that Industry
Canada approved the equipment.
NOTICE: The Ringer Equivalence
Number (REN) for this terminal equip-
ment is marked on the equipment itself.
The REN assigned to each terminal
equipment provides an indication of the
maximum number of terminals allowed
to be connected to a telephone interface.
The termination on an interface may
consist of any combination of devices
subject only to the requirement that the
sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.
Radio equipment
The term
IC
before the radio certification
number only signifies that Industry Can-
ada technical specifications were met.
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device. "Privacy of com-
munications may not be ensured when
using this telephone".
1-Year limited Warranty
Evidence of original purchase is
required for warranty service.
WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden
warrants, for one year, to the original
retail owner, this Uniden Product to
