English - 23
Adapter and Battery Information
AC Adapter
Base
Part number
PS-0034
Input voltage
120V AC, 60 Hz
Output voltage
7.8V AC @ 450mA
AC Adapter
Handset
Part number
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage
8V AC @ 300mA
x
Use only the supplied AC adapters.
x
Use the proper adapter for the base &
any chargers.
x
Do not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number
BT-1021
Capacity
300mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
x
Replace the battery when the talk
or standby time becomes noticeably
reduced. For replacements, call the Parts
Department (see the front cover).
x
When the battery gets low, the handset
beeps and shows a low battery alert;
recharge the battery.
Rechargeable Battery Warning
x
This equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
x
Nickel is a chemical known to the state
of California to cause cancer.
x
Do not short-circuit the battery.
x
The batteries in this equipment may
explode if disposed of in a fire.
x
Do not charge the batteries in any
charger other than the one specified
in the owner's manual. Using another
charger may damage the battery or cause
it to explode.
As part of our commitment to
protecting our
environment and
conserving natural
resources, Uniden
voluntarily partici-
pates in an RBRC®
industry program to
collect and recycle
used Ni-MH batteries
within the United States. Please call 1-
800-8-BATTERY for information on Ni-
MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects or
other reproductive harm. Wash hands
after handling.
Uniden works to reduce lead content
in our products & accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part
68 of the FCC rules and the require-
ments adopted by the ACTA. On the
bottom of this equipment is a label that
contains, among other information,
a product identifier in the format US:
AAAEQ##TXXXX. If requested, this
number must be provided to the phone
company.
An applicable Universal Service Order
Codes (USOC) certification for the
jacks used in this equipment is provided
(i.e., RJ11C) in the packaging with each
piece of approved terminal equipment.
A plug and jack used to connect this
equipment to the premises wiring and