file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Please note that these pages are meant as general instructions. While most of the information here applies to all
scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the
text.
Since a conventional system is really a collection of frequencies, the first thing you need to know is the frequency for each
channel you want to program. Here is an example of a conventional system frequency list from
:
Conventional System
●
of a basic conventional system. (
for a legend of the diagram.)
●
You can download a planning worksheet for conventional systems as a
●
Programming a Conventional System
❍
■
❍
Create at least 1 channel group
■
❍
Create at least 1 channel in each group
■
Programming a Conventional System
To program a conventional system, you'll need to program the required elements in following order (
Create a system
1. Go to the
menu and choose New System .
2. The scanner will prompt you for the System Type. Select Conventional .
3. When the scanner prompts you confirm, tap YES .
4. The scanner creates the system with a default name. Select
5. If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate
the system without changing the default settings.
System properties
All of these options can be found under your scanner's
menu. If necessary, the sub-menu and option name on
each scanner are listed beside the property.
Property
Option name
5 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (1 of 4)4/7/2009 10:08:2