89
Programming Your Scanner
WFM
(Broadcast)
— the scanner uses FM Broadcast for the channel.
This setting controls the modulation method used for the channel. In most cases, if
you leave this set to
Auto
, the scanner automatically selects the correct
modulation type for the channel you are programming.
[MENU]
Program System
Select a conventional system
Edit Group
(existing site)
Select a channel group
Edit Channel
Select a channel
Set Attenuator
This setting controls whether the scanner attenuates signals on this channel.
Select your setting, then press
.
On
— the channel is attenuated by about 20 dB.
Off
— the channel is not attenuated. The default setting is
Off
.
You can also toggle this setting by holding on the channel and pressing
then
[7]
within 2 seconds.
[MENU]
Program System
Select a conventional system
Edit Group
Select a channel group
Edit Channel
Select the channel
Set Priority
This setting controls whether the scanner treats the channel as a priority channel
while scanning. Select
On
or
Off
, then press
.
On
— when you turn on the Priority feature, the channel will be scanned every 2
seconds.
Off
— the channel will not be treated with priority. The default setting is
Off
.
Setting Channel Attenuation
C
Setting Channel Priority
C
UB335ZH.book Page 89 Friday, March 17, 2006 4:35 PM
