68
Throughout the balance of this manual you will see a designation such as
MELC
on the same line as a heading. This means that the section, in this example,
applies to
M
otorola,
E
DACS,
L
TR, and
C
onventional systems.
Specifying the Correct System Type
In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct
type:
Use online resources, such as the
www.radioreference.com
database, to identify
the system type.
Even though a system has digital channels, it is not necessarily a P25 system. To
be P25, the system type must be described as Project 25 (there are many
Motorola 800 Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
EDACS Wide is the same as EDAC Standard.
EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU]
Program System
Select the system
Edit Name
To enter a letter, turn the
Scroll Control
until the character you want appears. To
enter a decimal point, press
[.No]
. To move the cursor to the left, press
[4]
. To
move the cursor to the right, press
[6]
.
To clear a character, press
[.No]
twice. To clear all characters, press
[.No]
3 times.
To accept an entry, press
[E
YES
]
or
.
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Quick Key
Programming System Options
MELC
Editing the System Quick Key
C
UB335ZH.book Page 68 Friday, March 17, 2006 4:35 PM
