19
USING THE CLOCK
Your scanner’s clock displays whenever you turn off the radio functions. It can
also be used as a standard alarm clock.
SETTING THE CURRENT TIME
Follow the steps to set the current time:
1. Move the slide switch to
Clock Set
. The hour
digits flash.
2. Press ▲ or ▼ to change the hour by one hour
increments or press the number keys to select
the present hour. Then press
E/PGM
to set the
hour. The minutes digits flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. The seconds reset to 00.
Press
E/PGM
,
A M / P M
flashes.
4. Press ▲ or ▼ to move from AM to PM and back. Make your selection,
and then move the slide switch to
Clock
. The scanner exits the clock
setting mode.
#
Seconds resets to zero (0) when you reset the time.
SETTING THE ALARM TIME
Follow these steps to set the alarm time:
1. Move the slide switch to
Alarm Set
. The
hours digits flash.
2. Press ▲ or ▼ to change the hour by one hour
increments or press the number keys to select
the present hour. Then press
E/PGM
to set the
hour. The minutes digits flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press
E/PGM
to set the
minutes. The
A M / P M
display icon flashes.
4. Press ▲ or ▼ to move from AM to PM and back. Press
E/PGM
to make
your selection. To lock in the alarm time, move the slide switch
to
Clock
.
To have the
BC365CRS alert you at the preset time,
slide
Off/Radio/Tone
to either
Radio
or
Tone
. If you
set the selector to
Radio
, the alarm will sound with the
selected audio source (FM, Scanner, or Weather). If
you set the selector to
Tone
, the scanner will sound a
tone at the preset time. To silence the alarm, slide
Off/Radio/Tone
to
Off
. If you do not turn off the
L
L
L
