14
NOTE
• Scanning starts from the lowest to highest channel and
stops when it finds an active channel. It remains on
that channel until the transmission ends, then resumes
scanning after a 2 second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To deactivate Triple Watch
from the scanning mode, press and hold
16/9/TRI
for 2
seconds. TRIPLE disappears from the display
.
Transmit
1.
Transmission power can be set to 3.5W or
1W. Press
PWR h/l-loCk
to make the
change. The HIGH or LO indicator on the
displays accordingly.
2.
To transmit, press and hold
PTT
(push-to-talk). TX appears on the
display.
3.
To return to receive, release
PTT
. TX disappears.
NOTE
• If you press
PTT
for more than 3 minutes, TX starts
blinking and the transmission ends. The TX time out tone
sounds when you release
PTT
.
• If the battery indicator Level 0 is flashing when you press
PTT
, the radio will not transmit and the TX icon flashes.
(see page 6)
.
Lighted Keys and Display
To light the display, press any key except
PTT
.
NOTE
If you press any key except
PTT
while the display and keypad are
illuminated, they remain illuminated for 10 seconds.
HIGH
