Uniden AT4801, Руководство пользователя

Страница: 21 / 108

14
You can set up the auto attendant to answer outside calls, provide callers with
a company directory, direct calls to a specified extension, and enable callers
to record voice messages by forwarding the calls to the console’s general
mailbox. You can use the default announcement or record up to two outgoing
announcements and one directory announcement. For details on how to use
the auto attendant features, see the
Auto attendant operation on page 19 of
this user’s manual.
Activate auto attendant
The console displays
AuAt
above the line key(s) when the auto attendant is
turned on for the particular line(s).
When the console is idle, press MENU
/SELECT
.
Press or to scroll to
Line mode
, then press
MENU/
SELECT
or
/SKIP
.
3. Press or to select the desired line (
Line 1
,
Line 2
,
Line 3
or
Line 4
) or
All lines
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to scroll to Auto attendant , then press
MENU/
SELECT or
/SKIP .
NOTE:
The auto attendant settings, including number of rings and announcement, apply to all
lines where the corresponding line mode is activated.
Number of rings (auto attendant)
Use this feature to set the number of times the system rings before the auto
attendant picks up a call.
When the console is idle, press
MENU
/SELECT
.
Press or to scroll to Ans sys setup , then press
MENU/
SELECT or
/SKIP .
Press or to scroll to Auto att setup , then press
MENU/
SELECT or
/SKIP .
Press
MENU/
SELECT
or
/SKIP
again to select
No. of rings
.
Press or to choose the desired number of rings (
2
-
7
or
Toll saver
).
Toll saver - the answering system answers a call after two rings when
there are new messages, and after four rings when there are no new
messages. This enables you to check for new messages without paying
for a toll call.
6. Press
MENU/
SELECT or /SKIP to save the setting and return to the
previous menu.
1.
2.
1.
2.
3.
4.
5.
•
Answering system basic setup
Auto attendant setup