Uniden AT4801, Руководство пользователя

Страница: 17 / 108

10
You can add cordless handsets (AT480HS, purchased separately)
to your console. Each handset must be registered with the console
before use. The handsets are assigned with available extension
numbers starting from 1 in ascending order (
1 to 9 ).
Make sure the cordless handset is properly installed before you
begin registration. Refer to the user’s manual of the cordless
handset for details. If the handset does not have enough power to
proceed with the registration, you need to charge the new handset
for at least five minutes.
To register a handset to your console
Make sure the AT480HS handset is out of the charger and
the screen shows
1) Press MENU on Console
->Registration ->Register Ext. 2) Press # on this
extension to register.
before you begin registration.
1. On the console, press
MENU
/SELECT
.
2. Press or to scroll to
Registration
, then press
MENU/
SELECT
or
SKIP
.
3. Press
MENU/
SELECT or SKIP again to select
Register Ext .
4. On the handset, press # . The handset shows The handset shows
Registering... .
5. The handset beeps once and begins registering to
the console. It takes up to 60 seconds to complete
the registration. There is a beep sound when the
registration is successful. Both the console and the
handset show
Handset X registered.
(
X
represents
the extension number, ranged from
1
to
9
). It takes up
to 60 seconds to complete the registration.
6. Press a line key (
LINE 1
-
LINE 4
). If you hear a dial
tone, the registration was successful.
NOTES:
If the registration is not successful, the console screen displays
Registration failed
. Try the registration process again.
You can continue to register a second handset by following step 3 on the console and step 4 on
the handset. If no action is taken, the console will return to idle mode.
•
•
Register devices to your new console
Add and register a cordless handset
Console AT4801
Handset AT480HS