26
3. When you have new messages, your
answering machine starts to play the new
messages.If there is no new messages, your
answering machine will go to the command
waiting mode. Press
2
to start to play the
messages.
4. When your answering machine is in
the command waiting mode, enter a
command from the chart:
#
If you don’t press any keys for 10
seconds, the phone will hang up and
return to standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, try these simple steps first. If
you need help, call our Customer Care Line listed on the front cover.
General problems
Possible solutions
No handsets can
make or receive calls.
x
Check the telephone cord connection.
x
Disconnect the base AC adapter. Wait a few
minutes, then reconnect it.
x
Make sure the base is plugged in.
A handset can’t make
or receive calls.
x
Move the handset closer to the base.
A handset can make
calls, but it won’t ring.
x
Make sure the ringer is turned on.
A handset is not
working.
x
Charge the battery for 15-20 hours.
x
Check the battery connection.
x
Re-register the handset to the base.
A handset says
SEARCHING
.
x
Move the handset closer to the base. The
handset may be at the edge of the base’s range.
No handsets display
Caller ID information.
x
Let calls ring twice before answering.
x
Make sure your CID service is active.
I can’t transfer calls.
x
Re-register all handsets to the same base.
Command
Key
Repeat message
1
Play message
2
Skip message
3
Delete message
6
Turn on
7
Stop playback
8
Turn off
9
