unicraft TWG 1, Руководство по эксплуатации

Страница: 6 / 18

6 TWG 1 | Version 1.02
Intended use
2.5 Safety information
The Part Washing Unit has a number of safety markings
that must be observed and followed.
The safety labels must not be removed. Damaged or
missing safety markings can lead to malfunctions, perso
-
nal injury and material damage. They are to be replaced
immediately.
If the safety markings are not immediately recognizable
and comprehendible, the Part Washing Unit should be
taken out of service until new safety markings have been
made.
The following safety labels and symbols are appropriate:
Fig. 1: Safety markings at the Part Washing Unit
2.6 Safety instructions
- Mount the parts washer firmly on a level work
-
bench.
- Keep the work area clean and tidy. Messy work
-
places and workbenches increase the risk of acci
-
dents and injuries.
- Always use the right tool for every job.
- Do not use organic cleaning solutions for the parts
washer.
- Use gloves when working with the parts washer.
- Use the parts washer only in well-ventilated areas.
- Do not smoke in the near of the parts washing de
-
vice!
- Do not let strangers on the device. Visitors and
spectators, especially children as well as sick and
infirm persons, should be kept away from the work
-
place.
- Use the parts washer only in well-ventilated areas.
- Use only identical replacement parts for main
-
tenance and repair. Contact the Authorized Ser
-
vice Center for replacement parts.
3 Intended use
The Part Washing Unit TWG 1 must only be used for tho
-
rough cleaning with cleaning water and subsequent blo
-
wing off with compressed air from components in hard-
to-reach places. The work may only be carried out in a
closed box, with careful attention to absolute tightness.
The TWG 1 parts washing machine is only approved for
use with suitable cleaning agents and may only be ope
-
rated by persons who have been instructed in the device.
Proper use also includes compliance with all information
in this manual. Any use beyond the intended use or
otherwise is considered misuse.
For structural and technical changes to the Part Was
-
hing Unit, the company Stürmer Maschinen GmbH assu
-
mes no liability.
Claims of any kind due to damage due to improper use are
excluded.
3.1 Type plate
Fig. 2: Type plate Part Washing Unit TWG 1