unicraft TWG 1, Руководство по эксплуатации

Страница: 7 / 18

Technical Data
TWG 1 | Version 1.02 7
4 Technical Data
Fig. 3: Dimensions Part Washing Unit TWG 1
5 Transport, Packaging, Storage
Delivery
Check the Part Washing Unit for visible transport da
-
mage after delivery. If you discover any damage, imme
-
diately report it to the transport company or the dealer.
Transport
The parts washing device may only be transported
upright. The parts washing device must not be stacked
on top of each other. Also, no other items may be placed
on it.
For transport, the parts washing device is located on a
pallet. The pallet must be secured properly in the loading
area.
To protect against moisture and dirt, all bare metal parts
are greased.
Transport with a forklift / pallet truck:
For transport with a sufficiently dimensioned pallet truck
or forklift, the parts washer must be secured on a flat,
firm surface (for example, on a pallet) with bolts.
Packaging
All used packaging materials and packaging aids are re
-
cyclable and should be taken to a materials recycling de
-
pot to be disposed of.
The delivery packaging is made of cardboard, so please
dispose carefully by having it chopped up and given to
the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). These materials should be
taken to a collection point for recyclable materials or to
the local waste disposal company.
Storage
The parts washer must be thoroughly cleaned before
storing in a dry, clean, and frost-free environment. Never
store the device filled.
Model TWG 1
Length 785 mm
Width / Depth 595 mm
Height 700 mm
Weight 29,5 kg
Electrical voltage 230 V
Working pressure 5 bis 8 bar
Power frequency 50 Hz
Length of workspace 736 mm
Volume flow
cleaning supplies 0,8 l/min
Width /Depth Workspace 560 mm
Heigth of workspace 450 mm
max. Tank capacity 140 L
min. Content of detergent
tank 4 L
max. Content of deter
-
gent tank
9 L
NOTE!
Observe the weight of the device during transport and
lifting. The transport and lifting equipment must be
able to pick up the load
NOTE!
Protect the device from moisture
Tips and recommendations
For longer transports, make sure that the corrosion
protection is intact or renewed if necessary.
NOTE!
The device may never be stored or transported in a
horizontal position or filled!