18
KW-Series | Version 1.03
Troubleshooting
11 Troubleshooting
12 Disposal, recycling of used devices
Please take care in your own interest and in the interest
of the environment that all component parts of the ma-
chine are only disposed of in the intended and permit-ted
way.
12.1 Decommissioning
Disused machines should be professionally taken out of
operation in order to avoid later misuse and endanger-
ing of the environment or personal safety.
Step 1: Eliminate all environmentally hazardous operat-
ing materials from the used device.
Step 2: If necessary, dismantle the devices into manage-
able and usable components and components.
Step 3: The device components and operating materials
must be routed to the appropriate disposal rou-
tes.
Disorder
Possible cause
Solution
No indication after switching on
Battery defective or not charged
Charge or replace the battery
Display flashes continuously.
Battery voltage too low
Charge or replace the battery
Tare function does not work.
Tare-Button defective
Clean or Crane scale for repair
Display does not show [0] after
discharge
Tare set?
Warm-up time of the Crane scale too
short
1.Set tare
2. Longer warm-up time
The Button
The button re-
mains pressed after being pressed
1. Battery voltage too low
2. The Button
is defective
3. Power cord is defective
4. Keyboard is defective
1. Charge or replace the battery
2. Press harder and hold for approx.
2 sec
3. Open the front panel and check
the power cord
4. Contact dealer
The operation is not performed after
the key is pressed.
1. The scale is not on
2. The button is defective
1. Reconnect the power cord
2. Contact dealer
The reading of the weight is not pos-
sible
1. The load is moving
2. The "anti-movement" feature is
weak
3. Load cell or keyboard are wet
4. Keyboard is defective
1. Keep the load stable
2. Take higher "anti-movement" level
3. Take higher "anti-movement" level
4. Contact dealer
When reading the weight, the error is
displayed
1. The scale was not set to "0" before
the new load
2. Wrong unit
1. Manually set the scale to "0"
2. Switch to the correct unit
Battery does not charge
1. Pallet is defective
2. Battery is defective
1. Contact dealer
Remote control without function
1. Battery too weak
2. Distance too big
1. Change the battery
2. Reduce distance
