background image

4

EKZT-Series | Version 1.04

Safety

Tips and recommendations

It is necessary to observe the safety notes written in 
these operating instructions in order to reduce the risk of 
personal injuries and damages to property.

2.2 Obligations of the operating company

of the operator

The operating company is the person who operates the 
chain hoist for business or commercial reasons by her-
self, or leaves it to a third party for use or application, and 
who bears the legal product responsibility for the protec

-

tion of the user, the staff or for third parties.

Obligations of the operating company

If the chain hoist is used for commercial purposes, the 
operating company of of the chain hoist must comply 
with the legal working safety regulations. Therefore, the 
safety notes in this operating manual, as well as the 
safety, accident prevention and environment protection 
regulations applying for the area of application of of the 
chain hoist must be met. The following applies in partic-
ular:

- The operating company must be informed about 

the applying industrial safety regulations and fur-
ther analyse hazards resulting from the special 
working conditions at the place of use of the chain 
hoist. She must implement these in form of operat-
ing manuals for the operation of the chain hoist.

- During the entire lifetime of of the chain hoist, the 

operating company must verify whether the oper-
ating manuals prepared by her correspond to the 
current status of the regulations, and must adapt 
these if necessary.

- The operating company must unambiguously reg-

ulate and determine the responsibilities for instal-
lation, operation, troubleshooting, maintenance 
and cleaning.

- The operating company must ensure that all per-

sons who work with the chain hoist, have read and 
understood this manual. Furthermore she must in-
struct the staff in regular intervals and inform them 
about the hazards.

- The operator must provide the necessary protec-

tive equipment to the staff and order the use of the 
necessary protective equipment in a binding way.

Furthermore the operating company is responsible to 
keep the chain hoist always in a technically flawless 
state. Thus, the following applies:

- The operator must ensure that the maintenance in-

tervals described in this manual are kept.

- The operator must have all safety devices checked 

regularly for their good working order and their in

-

tegrity.

CAUTION!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead 
to minor or light injuries if they are not avoided. 

ATTENTION!!

This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead 
to property and environmental damages if they are 
not avoided. 

NOTE!

This combination of symbol and signal words indi-ca

-

tes a possibly dangerous situation which may lead to 
property and environmental damages if they are not 
avoided.

Tips and recommendations

This symbol highlights useful tips and recommenda-
tions as well as information for an efficient and trou-
ble-free operation.  

Содержание EKZT 10-1























Отзывы: