Unicorn LT5-H710-1, Руководство по эксплуатации

Страница: 5 / 28

Installation
★ Machine installation should only be
carried out by a qualified technici an.
★ Contact your Unicorn dealer or a
qualified ele ctrician for any electrical
work that may ne ed to be done.
★ The sewing machine weighs more than
43kg.
The installation should be carried out by
two or more people.
★ The top of the table should be 40 mm
in thickness and should be strong
enough to hold the weight and
withstand the vibration of the sewing
machine.
★ Do not connect the power cord until
installation is complete. otherwise the
machine may operate if the treadle is
depressed by mistake, which could
result in injury
★ Be sure to connect the ground. If the
ground connection is not secure, you
run the risk of receiving a serious
ele ctric shock.
★ Ref er to the instruction manual for the
motor for details on install ing and
using the motor.
★ All cords should be secured at least 25
mm away from any moving parts.
Furthermore. do not exce ssively bend the
cable or secure it too firmly staples,
otherwise shocks could occ ur
★ install the belt covers to the machine
head and motor.
★ Be sure to wear protective goggles and
glove s when handling the lubricati ng oil
and grease, so that they do not get
into your eyes or onto your skin,
otherwise infl ammation can result.
Furthe rmore, do not drink the oil or eat
the grease under any circumstances,
as they can cause vomiting and
diarrhoea.
Keep the oil out of th e reach of
chil dren.
★ Avoid setting up sewing machine near
sources o strong electrical noise such
as high-fre quency we lding equipment.
If this precaution is not taken, incorrect
machine operation may result.
Sewing
★This sewing machine should only be
used by operators who h ave recei ved
the necessary training in safe use
before hand.
★The sewing mac hine should not be used
for any appl ications other than sewing.
★ Do not touch any of the moving parts
or pre ss any obje cts against the
machine while sewing. as this may
result in personal injury or damage to
the machine.
- 5 -
★ Wait at least 5 minutes after turning off the power switch and disconnecting the power
cord from the wall outlet before opening the face plate of the control box. Touching
areas where high voltages art present can result in severe injury.
ꍾ Notes on safety