![background image](http://html1.mh-extra.com/html/unicorn/ls2-h520/ls2-h520_operation-manual_3750117013.webp)
- 3 -
1. 발판조작 / Pedal operation
올바른 사용방법 / OPERATION
★ 발판을 가볍게 ①까지 밟아서 저속재봉을 확인해주십시오. ②까지 밟으면 고속재봉을 합니다.
★ 발판을 앞으로 밟은후 중립(발판에서 발을 때었을때)③이 되면 바늘이 침판에서 내려간 위치에서 정지하는 것을
확인해주십시오. (침하정지를 설정한 경우)
★ 발판을 ④쪽으로 역으로 밟으면(또는 발판을 ④쪽으로 역으로 밟은후, 중립③으로 돌아온 경우) 사절후 바늘이
침판에서 올라간 위치에서 정지합니다.
★ Treadle the pedal lightly to position① and that the machine sews at low speed. Then treadle
the pedal to position② to sew at high speed.
★ After treading the pedal, return it to neutral③ (simply release the pedal) to stop the machine
with the needle tip below the needle plate
(when the needle position switch is set to the needle down position).
★ Back-treadle the pedal to position④ and release it to neutral to trim the thread and stop
the machine with the needle raised above the needle plate.
2. 바늘의 설치방법 / Attaching the needle
★ 바늘①의 긴 홈을 좌측으로 향하게 깊숙이 넣고
나사 ②로 고정해주세요
※ 미싱바늘은 DB×1을 사용해주세요
★ Insert the needle ① completely, making sure
that the lengthwise groove of the needle is
on the left, and secure it using the set
screw ②.
※ Use a DBx1 needle.
Содержание LS2-H520
