ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
31
3-5. Power Management Setup
The Power Management Setup allows users configuring the system to save energy
in a most effective way while operating in a manner consistent with their own style
of computer use.
Item
Optimized defaults
ACPI function
Enabled
ACPI Suspend Type
S1(POS)
Power Management
ACPI
** PM Timers **
Standby Mode
Disabled
Suspend Mode
Disabled
HDD Power Down
Disabled
Soft-Off by PWRBTN
Instant-Off
Power-On by Alarm
Disabled
Time (hh:mm:ss) Alarm
0
0
0
IRQ Wakeup Events
Press Enter
˙
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
IRQ Wakeup Events
Item
Optimized defaults
IRQ1 (KeyBoard)
ON
IRQ3 (COM 2)
OFF
IRQ4 (COM 1)
OFF
IRQ5 (LPT 2)
OFF
IRQ6 (Floppy Disk)
OFF
IRQ7 (LPT 1)
OFF
IRQ8 (RTC Alarm)
OFF
IRQ9 (IRQ2 Redir)
OFF
IRQ10 (Reserved)
OFF
IRQ11 (Reserved)
OFF
ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
32
Item
Optimized defaults
IRQ12 (PS/2 Mouse)
OFF
IRQ13 (Coprocessor)
OFF
IRQ14 (Hard Disk)
OFF
IRQ15 (Reserved)
OFF
3-6. PnP/PCI Configurations
This section describes the configuration of the PCI bus system. PCI is a system
that allows I/O device to operate at speeds nearing the speed of the CPU itself,
when communicating with its own special components. This section covers some
very technical items. It is strongly recommended that only experienced users make
any changes to the default settings.
Item
Optimized defaults
PNP OS Installed
No
Init Display First
PCI Slot
Reset Configuration Data
Disabled
Resources Controlled By
Auto(ESCD)
IRQ Resources
Press Enter
DMA Resources
Press Enter
Memory Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
˙
˙
Reset Configuration Data
Enabled
The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled
The BIOS will not reset the configuration data.
˙
Resources Controlled By
Auto(ESCD)
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ in the “IRQ Resources” field.
˙
PCI/VGA Palette Snoop
When set to [Enabled], multiple VGA devices operating on different buses can
handle data from the CPU on each set of palette registers on every video device.
Bit 5 of the command register in the PCI device configuration space is the VGA
Palette Snoop bit (0 is disabled).