ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
27
3-2. Advanced BIOS Features
This section allows you configuring your system for basic operation. You have the
opportunity to select the system’s default speed, boot-up priority, keyboard
operation and security.
3-3. Advanced Chipset Features
This section allows you to configure the system based on the specific features of
the installed chipset. This chipset manages bus speeds and the access to the
system memory resources, such as DRAM and the external cache. It also
coordinates the communications with the PCI bus.
It must be stated that these
items should never be altered. The default settings have been chosen because
they provide the best operating conditions for your system. You might consider
making any changes only if you discover that the data has been lost while using
your system.
Item
Optimized defaults
CPU Frequency
Auto
Memory Frequency
Auto
CAS Latency
Auto
Interleave Select
LOI
XOR BA0
Disable
Item
Optimized defaults
Virus Warning
Disabled
CPU Internal Cache
Enabled
External Cache
Enabled
First Boot Device
HDD-0
Second Boot Device
CDROM
Third Boot Device
LS120
Boot Other Device
Enabled
Swap Floppy Drive
Disabled
Boot Up Floppy Seek
Enabled
Boot Up NumLock Status
On
Gate A20 Option
Normal
Typematic Rate Setting
Disabled
Typematic Rate (Chars/Sec)
6
Typematic Delay (Msec)
250
Security Option
Setup
OS Select For DRAM > 64MB
Non-OS2
HDD S.M.A.R.T. Capability
Disabled
ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
28
Item
Optimized defaults
XOR BA1
Disable
XOR MB0
Disable
XOR Bit Select
18
Video Memory Size
64M
Output display
CRT
Flat Panel Configuration
Press Enter
Onboard Audio
Enable
Onboard USB1.1
Enable
Onboard USB2.0
Enable
Onboard IDE
Enable
Memory Hole At 15M-16M
Disable
˙
Video Memory Size
This field is used to select the onboard VGA’s frame buffer size that is shared
from the system memory.
<Choice: Disabled, 8M,12M,16M,32M,64M,128M,254M>
˙
Flat Panel Configuration
˙
Resolution
This field is used to select the resolution of LCD panel.
<Choice:320x240/640x480/800x600/1024x768/1152x864/1280x1024/
1600x1200>.
˙
Data Bus Type
This field is used to select the data type of LCD panel. Generally is “Normal”.
<9-24 bits, 1 ppc and 18,24 bits, 2 ppc>.
˙
Refresh Rate
This field is used to select the refresh rate (VSYNC frequency) to LCD panel.
Default is “60 Hz”. <Choice: 60/65/70/72/75/85>
Item
Optimized defaults
Flat Panel Type
LVDS
Resolution 800x600
Data Bus Type
9-24 bits, 1 ppc
Refresh Rate
60 Hz
HSYNC Polarity
Normal low
VSYNC Polarity Active
Normal low
SHFCLK Active Period
Free runing
LP Active Period
Free runing