ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
25
Chapter 3. AWARD BIOS SETUP
Phoenix – Award BIOS CMOS Setup Utility
> Standard CMOS Features
> Advanced BIOS Features
> Advanced Chipset Features
> Integrated Peripherals
> Power Management Setup
> PnP/PCI Configurations
> PC Health Status
Load Optimized Defaults
Set Supervisor Password
Set Password
Save & Exit Setup
Exit Without Saving
Use the BIOS CMOS setup program to modify the system parameters to reflect the
environment installed in your system and to customize the system as desired.
Press the <DEL> key to enter into the BIOS CMOS setup program when you turn
on the power. Settings can be accessed via arrow keys. Press <Enter> to choose
an option to configure the system properly.
In the main menu, press F10 or “SAVE & EXIT SETUP” to save your changes and
reboot the system. Choose “EXIT WITHOUT SAVING” to ignore the changes and
exit the setup procedure. Pressing <ESC> at anywhere during the setup will return
to the main menu.
All of the above CMOS BIOS items require board knowledge on PC/AT system
architecture. Incorrect setup could cause system malfunctions.
ENDAT-LX301 USERS MANUAL
UNICORN COMPUTER CORP.
26
3-1. Standard CMOS Features
The Standard Setup is used for the basic hardware system configuration. The main
function is for Data/Time and Hard Disk Drive settings.
˙
Video
Select the type of primary video subsystem.
<Choice: EGA / VGA, CGA 40, CGA 80, MONO>
˙
Halt On
Set the system’s response to specific boot errors.
<Choice: All Errors, No Errors, All, But Keyboard,
All, But Diskette, All, But Disk/Key >
IDE Primary Master/Slaver
Item
Optimized defaults
IDE HDD Auto-Detection
Press Enter
IDE Channel
Auto
Access Mode
Auto
The specifications of your drive must match with the drive table. The hard disk will
not work properly if you enter incorrect information in this category. Select “Auto”
whenever possible. If you select “Manual”, make sure the information is from your
hard disk vendor or system manufacturer.
Item
Optimized defaults
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
Press Enter
IDE Primary Slave
Press Enter
Driver A
1.44M, 3.5 in.
Driver B
None
Video
EGA/VGA
Halt On
All , But Keyboard