manualshive.com logo in svg

UNICOM USRobotics Courier Lite 5686G-PRO, Руководство пользователя

Поделиться
Скачать
UNICOM USRobotics Courier Lite 5686G-PRO Скачать руководство пользователя страница 94

5686G-PRO User Guide 

 

Page 

94

 of 

94

 

Copyright © 2018 USR, a Division of UNICOM Global 

 

COPYRIGHT 

 

U.S. Robotics Corporation 
1300 E. Woodfield Rd., Suite 506 
Schaumburg, Illinois 
60173-5446 
USA 

No part of this documentation may be reproduced in any form or by any means or used to make any 
derivative work (such as a translation, transformation, or adaptation) without written permission 
from U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this 
documentation and to make changes in the products and/or content of this document from time to 
time without obligation to provide notification of such revision or change. U.S. Robotic s Corporation 
provides this documentation without warranty of any kind, either implied or expressed, including, 
but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there 
is any software on removable media described in this documentation, it is furnished under a license 
agreement included with the product as a separate document, in the hard copy documentation, or on 
the removable media in a directory named LICENSE. If you are unable to locate a copy, please cont act 
U.S. Robotics and a copy will be provided to you. 

UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this 
documentation and the software described herein are provided to you subject to the following:  

All technical data and computer software are commercial in nature and developed solely at private 
expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227 -
7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is  provided with 
only such rights as are provided in U.S. Robotics standard commercial license for the Software. 
Technical data is provided with limited rights only as provided in DFAR 252.227 -7015 (Nov 1995) or 
FAR 52.227-14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of 
any legend provided on any licensed program or documentation contained in, or delivered to you in 
conjunction with, this User Guide. 

Copyright © 2018 U.S. Robotics Corporation. All rights reserved.  U.S. Robotics and the U.S. Robotics 
logo are registered trademarks of U.S. Robotics Corporation. Other product names are for 
identification purposes only and may be trademarks of their respective companies. Product 
specifications subject to change without notice. 

 

 

Содержание USRobotics Courier Lite 5686G-PRO































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды