5686G-PRO User Guide
Page
48
of
94
Copyright © 2018 USR, a Division of UNICOM Global
Command
Function
With the exception of the Dial options, modem ignores any commands issued after D in the same
command string.
D
n
Dial a phone number and issue other optional commands.
The numbers 0-9 are accepted. The maximum number of characters allowed is 36,
including the AT prefix, punctuation, and spaces.
Optional parameters:
P
Dial using pulses.
T
Dial using tones.
,
(Comma) Pause for 2 seconds (or the time in S-Register 8).
;
(Semicolon) Remain in Command mode after dialing.
"
Dial the letters that follow. Example, ATDT1800"DIAL USR" same
as ATDT18003425877.
W
Wait for a second dial tone before continuing to dial (with X3 or
higher).
@
Wait for an answer (with X3, X4, or X7).
/
Pause for 125 milliseconds.
R
Reverse frequencies. Use this command when calling an originate -only
modem. It forces the modem to dial out at the answer frequency.
!
Flash the switchhook (off hook 0.5 seconds, on hook 0.5 seconds, then
off hook). Use ! when other modems share the line.
L?
Display the last-dialed number.
L
Dial the last-dialed number.
S
n
Dial the number stored in memory at position n, where n = 0-4. Store
the number in memory using the &Z command.
$
Display help for the dial commands. ATD$
E
n
Command mode echo. Enables or disables the display of your typed commands.
E0
Command mode echo OFF. Your typing will not appear on the screen.
E1
Command mode echo ON. Your typing will appear on the screen.
