UNICOM USRobotics Courier Lite 5686G-PRO Скачать руководство пользователя страница 50

Страница: 50 / 94

5686G-PRO User Guide

Page

Command

Function

Query the modem.

Displays the product code.

Displays checksum.

Displays RAM TEST.

Displays the banner (product name).

Display current modem settings.

Display settings stored in NVRAM.

Display statistics for the last call.

Display product configuration.

Lists phone numbers with redial restrictions.

Displays modem’s Plug and Play ID.

I10

Display dial security account status information.

I11

Display link diagnostics report.

I15

Display caller ID information.

I16

Display channel probe report.

Control when the speaker sounds

The speaker is always off.

The speaker is on until the call is negotiated.

The speaker is always on.

The speaker turns on after the last digit is dialed and stays on until
the call is negotiated.

Return online. Use with the escape code (+++) to toggle between command and
online modes.

Return online (normal).

Return online and retrain. Use O1 if there were errors in a non -ARQ
data transfer.

Содержание USRobotics Courier Lite 5686G-PRO































































































Результаты поиска

Содержание USRobotics Courier Lite 5686G-PRO

Отзывы:

Бренды по названию

Популярные бренды

UNICOM USRobotics Courier Lite 5686G-PRO, Руководство пользователя

Результаты поиска

Содержание USRobotics Courier Lite 5686G-PRO

Отзывы:

Бренды по названию

Популярные бренды