+49-(0)9131-940 580-0
Page 3
www.unicol.de
INSTALLATION INSTRUCTIONS
INSTALLING SCREEN ARMS (B)
Fix the Screen Arms (B) to the screen using the fixing screws and spacers provided for your screen.
The Arms are provided with either Griplock plates or 2-part plastic spacers – see below:
NOTE
:
1. Griplock plates (X & Y). If required, these locate in the channel
section of the arm. The Griplock plate with tags (X) fits at the top and
grips into the teeth on the arm. The Griplock plate with 4 holes (Y) fits
into the channel at the bottom. Both can be rotated to fit the fixing
screw size for your screen.
Top
Griplock
X
Griplock
Y
Bottom
2. 2-part plastic spacers. If required, these locate in the channel section
of the arm. Join
the 2 parts through the Arm as shown in the diagram.
Screen
Arm
Fixing
screw
COMPLETING INSTALLATION
WARNING
: Screens are
heavy. We recommend 2
persons lift the Screen when
fitting to the Back Plate.
1. Loosen the M6 x 30
securing screw.
2. With the assistance of
another person, lift the
screen complete with
Screen Arms attached and
hook arms over the top
fold of the Back Plate,
making sure that the
screen is centrally located.
3. Allow screen to rest and
re-tighten M6 X 30
securing screw, ensuring
that it grips against Back
Plate bottom fold.
4. Connect
and
secure
power/audio/video cable to
complete the installation.
Use screw
driver to loosen
and then
tighten security
screw
M6 x 30 Securing Screw shown
gripping the Back Plate after
arms are hooked on.
2
3
Hook arms (B)
over
Back Plate (A).
