+49-(0)9131-940 580-0
Page 2
www.unicol.de
INSTALLATION INSTRUCTIONS
Parts List:
We have either supplied the correct fixings for your screen or supplied a Universal Fixing Kit.
If in doubt consult the screen instructions for the correct size of fixing.
Back Plate (A)
2 Screen
Arms (B)
(PZW shown)
WARNING
Universal mounts fit most screens. However, some screens
have more fixing points than Universal Mount arms can fix to.
In these circumstances consult the screen manufacturer’s
instructions to confirm how many fixing points have to be used.
If it is felt that the Arm fixing points are insufficient we
manufacture Xactmatch mounts specifically for individual
screens, which use the appropriate screen fixing points.
This is the PLW & PLX range.
Universal Fixing Kit
contains:
2 x Griplock plates
with tags.
6 x Griplock plates
with 4 holes.
6 pairs of 2-part
plastic spacers.
6 x M8 x 35 button
head screws.
4 x M8 x 55 hex
head screws.
6 x M5 x 16 pozi pan
head screws.
6 x M5 flat washers.
8 x M4 x 12 pozi pan
head screws.
4 x M5 x 20 pozi pan
head screws.
4 x M5 x 40 pozi pan
head screws.
4 x M6 x 30 cap
head screws.
PZW / PZX INSTALLATION
INSTALLING BACK PLATE (A)
WALL INSTALLATION
1. Determine the exact mounting location prior to installation,
consider where the cables are routed from the wall in relation
to the hole in the centre of the back plate.
WARNING:
Improper installation can result in serious personal
injury. Make sure that the structure can support a redundant
weight factor five times the total weight of the equipment: if not,
reinforce the structure before installing the PZW / PZX.
2. Using the Back Plate (A) as a template, mark, drill and plug
wall as necessary, fix the Back Plate to the wall ensuring that
the Plate is level.
CAUTION:
We recommend installation by a Qualified
Tradesperson, using masonry plugs or other reliable fixings to
ensure safe installation. Consult your builder or architect if in
doubt.
TROLLEY / STAND INSTALLATION
1. Attach the Back Plate (A) to the Trolley Mount Adapter plate
(shown on Trolley / Stand Instructions) using the 4 x M10 x
20mm Hex Head Screws supplied with the Trolley / Stand.
1
1a
