01865 767676
www.unicol.com
3
Revised 15/12/20
STEP 4
Utilising the tag locks and fixing pack provided with
your mount, attach the arms to the back of your
screen.
Ensure the arms are the correct way up before
tightening - the ‘hook’ part of the arm should be at
the top.
STEP 1
Using the 4 ceiling mounting slots, as shown
above, determine where you want to install your
mount, mark it and fix into position.
Please consider cabling and ceiling fixings prior to
installation. Please check surface is capable of
supporting 5x the combined solutions weight.
STEP 2
Slide all cabling through the column and through
the gap in the ceiling plate socket. Being mindful
of the cables, slide the column into the socket,
ensuring that the two holes either side align with
those on the mount. Using the through bolt, secure
the column into place and tighten the two grub
screws at the rear.
STEP 3
Slot cabling through the suspension mount socket
and slide the mount over the column, ensuring
that the two holes either side align with those on
the column. Like in Step 2, slide the through bolt
through the holes and secure. Tighten the two grub
screws at the rear.
