4
01865 767676
www.unicol.com
Revised 15/12/20
STEP 1
Using the wall mounting holes in the back plate,
determine where you want to install your mount,
mark it and fix into position.
Please consider cabling and wall fixings prior to
installation. Please check surface is capable of
supporting 5x the combined solutions weight.
STEP 2
Slide all cabling through the column and through
the gap in the wall plate socket. Being mindful
of the cables, slide the column into the socket,
ensuring that the two holes either side align with
those on the mount. Using the through bolt, secure
the column into place and tighten the grub screws
at the front of the socket. Continue from Step 3.
STEP 3
Using another team member, lift the screen up and
gradually offer it up to the back plate. Gently tilting
the screen forward, hook the arms over the lip of
the back plate and lower once in position.
Centre the screen horizontally by sliding from side
to side until you are happy with the position. If
double sided, repeat this step on the reverse side.
STEP 4
Once centered, ensure the bottom screws are not
screwed tight and screw down the top screws to
level the screen. Once level tighten bottom screws
to secure the mount. This is when you can adjust
the tilitng arms to suit.
Note that you won’t be able to adjust the screens
position after the screws have been tightened.
WALL ARM
