7
6.
Charge with the Travel Adapter
Open the cover of the multifunction jack
of the device. Plug the small end of the
adapter into the multifunction jack. Then
plug the larger end of the travel adapter
into a power outlet.
Note: improperly connecting the travel
adapter can cause serious damage to the
device. Any damage caused by misuse is
not covered by the warranty.
7.
Attach A Lanyard
Slide the lanyard through the slot and
hook it over the small projection.
Once you’ve installed your battery, SIM card and Micro SD card, you can turn on your device and
start using it.
When you turn on the device for the first time, you will be promoted to set your device. For more
information on how to set your device, please read the following instructions.
4.
Quick Operation Instruction
Operation tips: to properly use the MT90, common parameters should be set in advance before initial
use. This can be done by using the parameter editor or by sending SMS commands to the device.
Doing so will adapt the tracker to local time, allowing you to better enjoy the GPS service of Meitrack.
4.1.
Real-time Location Tracking
This location-tracking for knowing the current location of MT90, to ensure normal function of the
GPS signal.
Call the SIM card number embedded in MT90, hang up till the dial sound 2-3 times, as follows:
If your phone does not support direct access, you can enter longitude and latitude to the URL
to check the location. maps.google.com
