*** Note: The corrected speed reading is only in the Flux2 Display and the OEM speedometer is not affected.
9.
Data.
The
<
DATA
DATA
DATA
DATA
button on the Flux2 Display Home Page launches the Parametric Data Page from which you can
monitor your vehicle’s operating conditions and access the Acceleration Calculation Page.
a.
The Parametric Data Page displays three lines of user selectable data on the Display’s left side. Each parameter has an
abbreviation indicating what the displayed data represents as well as the current value. The three lines are not mutually
exclusive so you can have the same data on multiple lines if desired but each window must have something displayed.
b.
To change the parameter being displayed on any line, push the button to the left of that line and step through the rotary.
The rotary wraps and will repeat.
c.
Whenever the button is pushed a preview of the upcoming parameter is displayed and will continue to be displayed as long
as the button is pressed.
d.
The displayable items are dependent upon what data your vehicle’s factory computer uses, so some items may produce no
values on some vehicles. Additionally, data field population varies by vehicle because of the factory computer’s response time
and may take several seconds on some applications.
e.
The supported information rotary is listed in this chart. Note that those values that have associated English or Metric units
are automatically changed by choosing the desired system under
SETUP
SETUP
SETUP
SETUP
.
f.
Not all vehicles support all parameters and if your vehicle’s ECU does not support a Flux2 request, that display line will
show
<
Unsupported.
Unsupported.
Unsupported.
Unsupported.
This does not mean there is a problem with the Flux2 Display, it simply means your vehicle
does not use the requested parameter – for example
OPEN LP/TEMP or CLSD LP
OPEN LP/TEMP or CLSD LP
OPEN LP/TEMP or CLSD LP
OPEN LP/TEMP or CLSD LP
on a diesel application – and
therefore has nothing with which to respond. Press the
<
Unsupported
Unsupported
Unsupported
Unsupported
button to step to the next
parameter until you
find a supported item.
Display Text
Vehicle Parameter
RPM
Engine speed in revolutions/minute
MPH or KPH
Vehicle speed in either mph or kph
TADV
Ignition advance in degrees before top dead center
INTK
Intake Air Temperature in degrees F or C
TPS
Throttle Position in percentage
OPEN LP/TEMP or CLSD LP
Fuel system status
LOAD
Calculated engine load in percentage
TEMP
Coolant temperature in degrees F of C
SF1
Short term fuel trim, bank 1
LF1
Long term fuel trim, bank 1
SF2
Short term fuel trim, bank 2
LF2
Long term fuel trim, bank 2
XEGT
*** Exhaust Gas Temperature ***
XB
*** Boost pressure ***
Batt
Vehicle battery voltage
