Unical HP OWER 320RK, Руководство пользователя и инсталлятора

Страница: 68 / 88

27
CAUTION: it is possible that a certain quantity of oil from the compressor is deposited in the pipes of the refrigeration
circuit, especially by bends. In case of maintenance operations in which it is necessary to unsolder the pipes, it is strongly
recommended to proceed with the cutting of the same and not with the desoldering with a torch, as the flame triggers any
oil present.
It is prohibited to fill the refrigerant circuits with a refrigerant other than that indicated on the identification plate. Using a
different refrigerant can cause serious damage to the compressor.
It is prohibited to use oils other than those indicated in this manual. Using a different oil can cause serious damage to the
compressor
The heads and delivery pipe of the compressor are normally quite hot..
Be careful when working near the condensing coils.
The aluminium fins are very sharp and can cause serious injuries.
Always use appropriate personal protective equipment.
After the maintenance operations, pay attention to the correct tightening of the cable gland designed for the passage of the
electric power cable.