Unic FRIGO ST, Техническая заметка

Страница: 6 / 76

6
1- Safety inStruCtionS
This device is intended to be used only for its specific use.
The manufacturer disclaims any liability for damage caused by abnormal use or abuse.
This device is not intended to be used by persons (including children) with reduced physical, mental or
sensory capacities, or having a lack of experience and know-how, unless they are supervised or have received
instructions on the use of the appliance by a person responsible for their safety.
Supervise children to make sure they do not play with the appliance.
Do not leave the packaging elements within reach of children. These elements are potentially a source of
danger.
The installation must be done by a qualified technician and following local and national regulations. He is the
only one to be authorized to access the internal parts of the device for maintenance and repair.
Use only the technical and spare parts manuals for proper functioning of the machine, and avoid compromising
safety.
Access to the service area is limited to persons with the necessary knowledge of safety and hygiene as well
as practical experience of the device.
Leave enough free space around the machine to facilitate its use and to preform any maintenance operations.
The device must not be :
- exposed to the elements of the external environment or placed in damp places,
- exposed to a water jet or splashing.
- installed in areas where the jets or high pressure cleaners are used.
The device must be :
- placed on a stable, level and horizontal surface
- used at an ambient temperature of 5°C to 35°C (41°F - 95°F), (if it is stored at an ambient temperature below
5°C (41°F) the water circuit (boiler-piping) must be drained.)
Before connecting the power and water supplies, check that the electrical and water network are in accordance
with the technical information plate of the device.
The power supply must be provided with the following safety features: power switch which completely isolates
the machine from the mains (gap between contacts of at least 3 mm), efficient earthing and an effective circuit
breaker for protection against earthing leaks; section of the conductors appropriate for a power capacity.
Before connecting or disconnecting the power cable, switch the main switch onto position 0. If the power
supply cable is damaged, it must be replaced by the manufacturer, by its after-sales service technician or
similarly qualified persons, to avoid any danger.
For electrical safety, make sure that the device is properly earthed.
The manufacturer disclaims any liability for damage caused by improper earthing.
The device must be connected to a water network with a pressure of 1 to 8 bar (0.1 to 0.8 Mega Pascal)
and a tap readily accessible must be fitted in front of the water supply tube. The device is to be installed with
adequate backflow protection to comply with applicable federal state and local codes.
In case of emergency (fire, surge, abnormal noise, etc.) the first thing to do is to cut off the current and close
the water tap.
Be careful not to obstruct the air inlets of the machine with towels or other objects.
Beware of hot surfaces such as cup heaters, the unit heads and the hot water and steam outputs.
Never install containers filled with liquid on the top of the machine.
Beware of jets of hot water or steam.
The machine should be descaled only by a qualified technician.