Unibor E3000, Руководство пользователя

Страница: 8 / 31

8
Maximum
Arbor
hole cutting capacity in .2/.3C steel = 1-1/4 ” dia. x 1-3/8 ” deep
bore = 3/4" Weldon
Suitable only for a single phase 50-60Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in pro-
gress. D.C. current will earth back through the magnet and cause irreparable dam-
age.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
Motor Unit
Voltages 120V 50-60Hz
Normal Full Load 7 A
Electro Magnet 5 7 W
Size 7- 3/32 ” long
3- 9 / 16 ” wide
Holding Force at 20°C with 1 "
minimum plate thickness
2248 lbs
The use on any material less than 1 " thick will progressively reduce the magnetic
performance. If possible, substitute material should be positioned under the mag-
net and work piece to equate to a suitable material thickness. If this is not
possible, an alternative secure method of restraining the machine MUST be used.
Overall Dimensions
Height - Maximum 16 -5/ 16 ”
Height - Minimum 1 3 -3/4”
Width (inc Capstan Fitting) 7-3/32 ”
Length Overall (inc Guard) 1 0 -1 5 / 16 ”
Nett Weight 25.8l bs
Part No. E 3000
s
Specification