Unibor E3000, Руководство пользователя

Страница: 14 / 31

1 4
s
Troubleshooting
Magnet and motor do not function.
-
Damaged or defective wiring.
- Defective fuse.
- Defective control unit.
- Defective power supply.
- Damaged or defective wiring
- Carbon brushes are stuck or worn out
- Defective on / off switch
- Defective control unit
- Defective armature and/or field
- Defective protective reed switch
- Play in the guide
- Bent spindle
- Shaft extending from the motor is bent
- Pilot bent
- Bent spindle
- Shaft extending from the motor is bent
- Triangular guide not mounted straight
- Dirt between spindle and the guide
- Armature Gear ring worn out
- Gear(s) worn out
- No grease in gear box
- Armature damaged
- Field coil burnt
- Carbon brushes worn out
- Damaged or defective wiring
- Damage to armature or field coil
- Damaged or defective brushes
- Guide is set too tight
- Guide is dry
- Guide/Rack/Pinion is dirty or damaged
- Bottom of magnet not clean and dry
- Bottom of magnet not flat
- Work piece is not bare metal
- Work piece is not flat
- Work piece is too thin less than 3.5mm
- Defective control unit
- Defective magnet
- Damaged / defective wiring
- Motor seriously dirty
Magnet does function, the motor does not.
Hole cutters break quickly, holes are
bigger than the hole cutter.
Motor running roughly and/or seizing up.
Motor making a rattling sound.
Motor humming, sparks and motor has no force.
Motor does not start or fails.
Guiding takes a great deal of effort.
Insufficient magnetic force.
Frame under voltage.
- Damaged or defective wiring
- Wrong value fuse
- Defective magnet switch
- Defective control unit
- Damaged or defective wiring
- Wrong value fuse
- Motor running roughly
- Defective armature and / or field
- Carbon brushes worn out
- Defective control unit
- Loose or defective gear-rack
- Defective rotation system
Fuse blows when magnet switch is turned on.
Fuse blows when motor is started up.
Rotation system free stroke too long.