UNIA ARES L series, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 34

OPERATING AND MAINTENANCE MANUAL ARES L
- 26 -
3.5.7 Adjustment of the Folding Hydraulic System ARES L 4.5; 6.0
Fig. 18. Adjustment of the folding hydraulic system
Hydraulic adjustment is used to adjust the machine after folding the left and right sections to the
transport position. Unlock the nut [B] and unscrew or tighten the screw
[A] so that the left and
right sections after folding are in the vertical position and lock them with the nut [B] . The lock [D]
is used for blocking the machine after folding, while the lever
[C]
is used for the lock during
operation.
3.5.8 Deflectors adjustment (deflector option)
a) Disc deflector ARES L 4,5; 6,0
Height adjustment:
• remove the cotter pin
• pull out the pin
[B],
•
lift up or lower the deflector [A]
• re-lock with the pin [B] on the corresponding holes.
Width adjustment:
•
remove the cotter pin
• pull out the pin [C],
•
set the position width of the deflector [A]
• re-lock with the pin [B] on the corresponding holes.
Fig 19. Disc deflector adjustment -
ARES L 4.5; 6.0