background image

                                                                                                                     

UTR2810E Series LCR Meter 

– User Manual

 

 

Preface 

Thank you for purchasing this product. In order to use this product safely and correctly, please read this manual thoroughly, 
especially the safety notes. 
 
After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, 
for future reference. 
 

Copyright Information 

UNI-T products are protected by patent rights in China and other countries, including issued and pending patents. Uni- 
Trend reserves the rights to any product specification and pricing changes. 
 
Uni-Trend Technology (China) Co., Ltd. all rights reserved. Trend reserves all rights. Information in this manual supersedes 
all previously published versions. No part of this manual may be copied, extracted or translated by any means without the 
prior permission of Uni-Trend. 
 
UNI-T is the registered trademark of Uni-Trend Technology (China) Co., Ltd. 

Warranty Service 

The instrument has a warranty period of one year from the date of purchase. If the instrument is damaged due to improper 
operation by the user during the warranty period, the maintenance fee and the costs caused by the maintenance shall be 
borne by the user, and the instrument shall be maintained by the company for life. 
 
If the original purchaser sells or transfers the product to a third party within one year from the date of purchase of the product, 
the warranty period of one year shall be from the date of the original purchase from UNI-T or an authorized UNl-T distributor. 
Power cords, accessories and fuses, etc. are not included in this warranty. 
 
If  the  product  is proved to  be defective  within  the  warranty period,  UNI-T  reserves  the  rights to  either  repair  the  defective 
product without charging of parts and labor, or exchange the defected product to a working equivalent product (determined 
by UNI-T). Replacement parts, modules and products may be brand new, or perform at the same specifications as brand new 
products. All original parts, modules, or products which were defective become the property of UNI-T. 
 
The  "customer"  refers to  the  individual  or entity  that  is  declared  in  the guarantee.  In  order  to  obtain the  warranty  service, 
"customer" must inform the defects within the applicable warranty period to UNI-T, and perform appropriate arrangements for 
the warranty service. 
 
The customer shall be responsible for packing and shipping the defective products to the individual or entity that is declared 
in the guarantee. In order obtain the warranty service, customer must inform the defects within the applicable warranty period 
to UNI-T, and perform appropriate arrangements for the warranty service. The customer shall be responsible for packing and 
shipping the defective products to the designated maintenance center of UNI-T, pay the shipping cost, and provide a copy of 
the purchase receipt of the original purchaser. If the products is shipped domestically to the purchase receipt of the original 
purchaser. If the product is shipped to the location of the UNI-T service center, UNI-T shall pay the return shipping fee. If the 
product is sent to any other location, the customer shall be responsible for all shipping, duties, taxes, and any other expenses. 

Guarantee Limit 

This warranty shall not apply to any defects, malfunction or damages caused by accidental, machine parts' wear and tear, 
using outside the product's specifications, improper use, and improper or lacking of maintenance. UNI-T under the provisions 
of this warranty has no obligation to provide the following services:   
a. Any repair damage caused by the installation, repair, or maintenance of the product by non UNI-T service representatives;   
b. Any damage caused by improper use or connection to an incompatible device;   
c. Any damage or malfunction caused by the use of a power source not provided by UNI-T;   
d. Any maintenance on altered or integrated products (if such alteration or integration leads to an increase in time or difficulty 

of product maintenance). 

 
This warranty is written by UNI-T for this product and it is used to substitute any other express or implied warranties. UNI-T 
and  its  distributors  do  not  offer  any  implied  warranties  for  merchantability  or  applicability  purposes.  For  violation  of  this 
guarantee, UNI-T is responsible for the repair or replacement of defective products as the only and complete remedy available 
to  customers.  Regardless  of  whether  UNI-T  and  its  distributors  are  informed  that  any  indirect,  special,  incidental,  or 
consequential damage may occur, the UNI-T and its distributors shall not be responsible for any of these damages. 

Содержание UTR2810E Series



































Отзывы: