UNI-T UTG9000C-II Series, Руководство пользователя

Страница: 8 / 29

2.3.2 Back Panel
4. Power amplifier
output interface
3. AC power input
1.USB interface
2. Fuse
1. USB Interface
Connect to the upper computer through this USB interface.
2 Fuse
When the AC input current exceeds 2A, the fuse blows to cut off the AC
input to protect the instrument.
3 AC Power Input
The rated input of this product is: 100~240V, 45~440Hz; power fuse:
250V, T2 A.
4. Power Amplifier Output Interface
Built-in power amplifier output interface.
.
.
Picture 2-2 Back panel
2.3.3 Function Interface
1. STD: Abbreviation of Standard, fundamental wave display information.
STD indicates that the waveform type is in the carrier wave state.
2. MOD: Modulation display information, MOD indicates that the waveform
type is in the modulation wave state.
3. System: System setting. indicates that the output impedance is 50Ω, 50Ω
indicates the screen brightness, indicates that the device is connected
to the computer through USB device, indicates the button sound is
turned on.
4. Fundamental wave frequency setting and Count (frequency meter) display.
5. Fundamental wave amplitude setting and DC bias setting.
6. Fundamental wave phase and duty ratio settings.
7. Modulation mode and modulation parameter settings.
Picture 2-3 Function interface
UTG9000C-II User Manual