Figure. 9
13
14
*. The contents of this manual are subject to change without prior notice.
*. Due to different batches, the materials and details of actual products may be
slightlydifferent from the graphic information. Please refer to the goods received.
The experimental data in the manual are theoretical values and all from Uni-Trend's
internal laboratories, for reference only. Customers cannot use them as bases for
placing orders.If users have any questions, please contact customer service.
Length
Warning
Please do not open the product housing to avoid inaccurate measurements or
product damage.
X. Bluetooth APP
After turning on the tachometer, long press the MAX button, and the Bluetooth symbol
on the smartphone. Search and connect UT372D. The Bluetooth symbol on the
Note: Android 10 and up smartphones need to turn on the location function at
the same time to connect successfully.
1. General Maintenance
This product must be maintained by qualified professional maintenance personnel
will flash on the screen. Turn on the Bluetooth function and the APP iENV or UTienv
tachometer screen will always be displayed after the connection is successful.
XI. Maintenance and Repair
or designated maintenance department.
a.
1. Preparation
Please install the APP iENV (IOS) or UTienv (Android) on the smartphone first.
2. Installation
For IOS devices, search "iENV" in APP Store.
For Android devices, there are three ways to download the APP:
Search "UTienv" in Play Store.
Download on UNI-T's official website:
https://meters.uni-trend.com.cn/static/upload/
appDownload/UTienv.apk
Scan the QR code below. (Note: APP versions
may be updated without prior notice.)
3. Connection
Clean the product housing regularly with a dry cloth. Do not use cleaners that
b.
contain
abrasives or solvents.
2. Battery Installation and Replacement
The product is powered by three 1.5V AAA batteries. Please refer to Figure 9 to
install or replace the batteries.
the battery cover to take out the batteries. Install the new batteries and be sure
Turn the product front panel down. Loosen the quick release screw and remove
that the polarity is correct.
Please use the same type of battery, and do not install inappropriate batteries.
After installing the new batteries, close the battery cover and tighten the quick
release
screw.
a.
b.
c.
d.
(3) Range
Non-contact
measurement
Rotational velocity (RPM)
Frequency (Hz)
Count (REV)
Rotational velocity (RPM)
Frequency (Hz)
Surface velocity
Contact measurement
1-99999
1-1666
1-99999
1-19999
1-333
0.1m contact wheel
0.1-1999m/min
0.4-6550ft/min
4-78700in/min
6'' contact wheel
0.15-1524m/min
0.5-5000ft/min
6-60000in/min
0-99999 (m/in/ft)
