UNI-T UT313, Руководство по эксплуатации

Страница: 11 / 18

17 18
2 Use probe to measure object according to the selected way and
measurement result shall display in data value display area of LCD as
shown in the following illustration:
4 Maximum value measurement
Under corresponding measurement mode, press key MAX to enter into
maximum value measurement mode, LCD screen shall display indicator of
MAX and results of maximum under corresponding measurement mode in
the data value display area; press key MAX to cancel maximum value
measurement.
7 Data storage:
Press key REC to enter into manual data storage mode, LCD screen shall
display indicator of DATA and store the present measurement value manually,
DATA signal shall disappear after about 0.5 second; press key REC to
conduct next position data storage. Press REC for a long time to enter into
automatic data storage mode, indicator of DATA on LCD screen shall flicker
continuously, and store the present measurement value automatically
5 Reading holds measurement:
Press HOLD key to enter into reading hold measurement mode, LCD screen
shall display indicator of HOLD and hold the present measurement value in
data value display area on LCD screen.
6 Backlight display:
Press the key to enter into LCD backlight display mode, and LCD
screen shall display indicator , and light up, press key to exit
backlight display.