UNI-T UT311, Руководство по эксплуатации

Страница: 4 / 7

Please pay attention to + and - poles during battery installation.
Please pay attention to protect LCD of vibration meter to avoid scratch or crush.
IV.INSTRUMENT STRUCTURE
1. Instrument structure (shown in Figure 1 and Form 1)
UNI T
Sensor Shell
LCD
Measurement key
Three-gear toggle switch Measurement rod
1.Sensor 2.LCD
3.Three-gear toggle switch
4.Shell
5.Measurement key
6.Measurement rod
2. Symbol (shown in Figure 2 and Form 2)
Vibration acceleration
Vibration speed
Vibration displacement
1.
2.
3. Vibration acceleration
Vibration speed
Vibration displacement
3. Key instructions (shown in Figure 1)
The 5 element shown in Figure 1: Measurement key button
th
V.INSTRUMENT SETUP AND OPERATION
1.Battery installation
Please open cell box on the instrument back and then install 6F22 type 9V laminated cell
into cell box. Please pay attention to polarity then cover it.
2.Power Inspection
Please press measurement key and observe display. Battery replacement mark in the left
end of display shows low battery voltage and prompt of battery replacement. No mark refers
to normal voltage for measurement. (Machine will power off automatically 1 minute after
loosening the key.)