UNI-T UT311, Руководство по эксплуатации

Страница: 3 / 7

UT-311 vibration meter is a split portable vibration measurer which consists of acceleration
sensor and digital measurement display circuit. It is mainly used to measure vibration
displacement, speed (or intensity) and acceleration of mechanical equipment. Current status
(such as excellence, notice or danger) can be determined for equipment (such as fan, pump,
compressor and motor, etc) by above measuring data according to enterprise & machine
standards by comparing with national metrological verification regulations of JJG 676-2000
working vibration meter.
Such instrument has measuring value locking, low-voltage prompt and automatic shutdown
functions. With advantages such as wide measurement scope, simple operation and convenient
carrying, it can be used for patrol detection of equipment vibration in power, metallurgic and
petrochemical industries widely so it is an ideal tally instrument.
I.INTRODUCTION TO UT311 PRODUCT
Working principle:
Acceleration sensor
Wave filter
Integer I Adjustment I
Integer II Adjustment II
AC/DC A/D LCD
II.UNPACKING INSPECTION
Please unpack and check if following items are deficient or damaged or not. Please contact
the nearest sales service agent of our company if there is any deficiency or damage.
1.Host------------------------------------------------------------------1 set
2.Stainless steel measurement rod----------------------------1 (standard) wire assembled to host
3.Hanging rope----------------------------------------------------- 1 (standard) wire assembled to host
4.9V battery----------------------------------------------------------1 section
5.Manual--------------------------------------------------------------1 book
6.Certificate----------------------------------------------------------1 sheet
III.SAFETY NOTICES
Warning: Please pay attention to possible danger and conditions for user or damage
factors for vibration meter!
Please use vibration meter according to steps shown in the manual or it may be damaged.
Please abide by following guidelines to avoid instrument damage.
To check if shell is ruptured or lacks of plastic pieces or not before using vibration meter.
Please do not use vibration meter with damaged shell.
Please replace battery as soon as possible to avoid error of measuring data if battery
symbol of
appears.
Please do not continue to use vibration meter which operates abnormally. Please send it to
fixed repair agent of our company for repair.
Please do not use vibration meter in wet environment with combustible and explosive gas.
Please do not detach shell of vibration meter to avoid damage.
Please do not try to charge battery to avoid personal injury due to battery explosion.