21
Continued Torch & Wire Feed Set Up for Aluminium Wire
(10) Fit and tighten the torch euro connection to the machine euro connector
(11) Install a U groove drive roller of the correct size for the diameter wire being used.
(12) Place aluminium wire onto spool holder. Feed the wire through and over the drive roller into the inlet
guide tube.
(13) Press and hold the inch wire button to feed the wire down the torch cable through to the torch head.
(14) Fit an Aluminium contact tip of the correct size to match the diameter of the wire being used
(15) Fit the remaining front end parts to the torch neck ready for welding
(15) Fit the nozzle to the torch neck ready for
welding.
(11) Install a U groove drive roller of the cor-
rect size for the diameter wire being used.
(12) Place aluminium wire onto spool
holder. Feed the wire through and over
the drive roller into the inlet guide tube.
(10)Connect the torch to the machine
tighten and secure the torch euro
connector to the machine euro
connection.
(14) Fit an Aluminium contact tip of the
correct size to match the wire diameter
being used
(13) Press and hold the inch wire button to
feed the wire down the torch cable through to
the torch head.
