3 Configuring the DSL/Cable Gateway
Once you have completed the installation stage and have configured a PC properly as described
in chapter two, you are ready to configure the DSL/Cable Gateway for actual applications.
Internet Access in Five Minutes
You can configure your DSL/Cable Gateway quickly by the Setup Wizard at the very first time
when logon to the gateway.
Using Setup Wizard
The Wizard will guide you step by step to configure the gateway for your Internet Access by
connecting DSL/Cable modem.
1. Open your browser
and type
http://192.168.1.1
in the browser's address box; it is the default
IP address of your Gateway.
2. Logging In
After entering the default IP address as mentioned above, a password prompt screen will ask
you to logon. If you are logging for the first time (by default there is no password, which is blank).
The password is always displayed as a string of asterisks ("*"). Clicking the
LOGIN
button to
begin gateway management session. If you have modified the password, you’ll have to use
the password that you’ve modified. You need to use the correct password before you can
enter the user interface. No matter what password you use, each character will always be
displayed in the logon prompt as a "*". If you forget the password, you’ll have to reset the
router back to its factory settings.
7