EYE XO USER MANUAL
8
Hardware Install - Cont
Mounting Br
ack
et
The EYE XO Sensor and bracket
come attached together in the
box. Slightly loosen the black M6
15 mm screws that are holding
the sensor to the bracket so you
can remove it. Please make sure
you have measured 3.5 feet
from the front and middle of the
sensor to your tee position. Do
NOT align to the bracket.
1
Place the ladder under the
location on the ceiling where the
bracket will be mounted. Place
the bracket flat against the
ceiling with the hinges facing
down toward the ground. The
longer side of the hinges must
be closet towards the impact
2
With the bracket in position,
grab the 10 silver M4 32mm
screws and screw them in the
locations below in the diagram.
3
Step 1: Mount Bracket
