EYE XO2 USER MANUAL
20
Calibrating
During Step 6 of the installation
process, the calibration tool on the
right will open. Please follow the
prompts on the screen.
Lay the calibration board flat and
ensure the calibration board is within
the red squares on all 3 windows.
*Ensure there are no other objects
visible in each camera view when
calibrating your launch monitor.
Step 1
Next, place the bubble leveling tool on the
calibration board to confirm that the hitting
mat is level front to back and side to side.
Step 2
Before pressing “Calibrate” below the first
camera window, make sure the top of the
calibration board is parallel with the impact
screen.
If all the above conditions are met, click
“Calibrate” on the bottom left.
Plese wait while your EYE XO2 calibrates.
Step 3
Uneek
or Launcher
