EYE XO2 USER MANUAL
10
Hardware Install
C
onnec
tion
Take out the Ethernet LAN cable from the box. Connect the end with the
tag that reads “Connect this side of LAN cable to Sensor ONLY” to the
sensor. Connect the other end DIRECTLY to your PC ethernet port and
NOT the USB adapter.
1
Take out all 3 components of the power source: power cable, power
adapter, and power connector. Connect all 3 accordingly and connect the
“Power Connector” end directly to the sensor as shown below. Turn on red
switch.
2
Step 3: Connection
Note: The plug must be plugged into a matching outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
An extra green grounding wire is provided on the end of the power connector in
case your outlet is not grounded.
**Make sure to check the connection status before you start the software
installation process.
Ethernet LAN
Cable
Power Cable
Power
Connector
Power
Adapter
NECESSARY PARTS
Power
Connector
Ethernet
LAN
