Uneek 4x4 JK-RB-ASM11, Инструкция по монтажу

Страница: 9 / 20

Remove original plastic bumper and all hardware
behind as per your factory service manual. 2 bolts
each side, and 2 in the middle. Unplug your fog lights
loom. Also remove factory tow hook.
Fit stainless-steel step from behind the bumper with
M10 button head cap screws and nyloc nuts. 4 off
for step with light mounts, 2 off with step with no
lights. If fitting a rear winch, follow rear winch
instructions now to fit winch cradle.
If no tyre carrier is to be mounted fit blanking plate
for tyre carrier hole with M10 button head cap
screws and nyloc nuts.
Fitting chassis nut plate into the chassis on the left-
hand side of the jeep you will be able to fit the LH
chassis mount with M12 x 50 bolts. Use heavy duty
M12 washers, spring washer and M12 mud guard
washer for side bolts.