Uneek 4x4 JK-RB-ASM11, Инструкция по монтажу

Страница: 14 / 20

Place winch cradle with winch in-between new winch
support brackets. Using M12 bolts with washers both
sides and nyloc nuts hold winch cradle in place. You
want to push winch cradle down as far as it will go.
Then torque up bolts.
You can see the winch clutch lever here turned to be
out of the way.
Wire up winch.
Fit tyre carrier as per Tyre carrier instructions. Make
sure your tyre is up high enough to clear the winch.
Remove factory tyre carrier from rear door.
Retain bolts.