Uneek 4x4 JK-RB-ASM11, Инструкция по монтажу

Страница: 12 / 20

Using M6 hardware fit Mudflaps to bracket.
If you have a lot of offset on your wheels you can
skip a hole and mount the mud flaps further out to
cover your tyres.
Repeat for other side.
To fit your number plate relocation, remove spare
tyre and knock out centre cap if fitted. Place backing
plate of number plate relocation on factory tyre
carrier. Fit tyre on to tyre carrier and torque up
wheel nuts.
Fit outer plate of number plate relocation with
supplied nut plate and M8 bolt and washer. Run the
original number plate wires or new ones from the
tail lamp up to the new wires of the relocation
bracket. Use a quick connect fitting found at any
auto parts shop so you can easily remove the spare
tyre later without messing with electrical tools.
Don’t
forget to refit your number plate now.
Remove tow hooks and bolts that mount bumper to
chassis mounts. Remove tyre carrier. Remove
stainless steel step.