UnderCover 2110, Руководство по установке

Страница: 4 / 16

FACT:
UnderCover is the
lightest hardshell
tonneau in the
industry. Only
58-pounds for full
size trucks.
A
B
C
D
E
Installing your Ford Sport Trac hardware is simple and easy to do. The Sport Trac comes
with the mounting holes already in place. Our hardware mounts right to the existing holes.
Page 4, Picture A shows what the rear bracket will look like once it is installed.
Remove the plastic plugs with a pair of needle-nose pliers. Save these for future use if you
ever remove the bracket system. See Page 4, Picture B .
Install the rear bracket using two 6mm bolts and two washers threaded into the preset
mounting holes. See Page 4, Picture C . Once you have tightened the bolts by hand, use a 10mm
wrench or ratchet/socket to firmly secure the bolts to the bed. See Page 4, Picture D . BE SURE
NOT TO OVER TIGHTEN, DOING SO COULD SHEAR OFF THE BOLT HEAD.
The mounting holes on the rear bracket are slotted to allow for adjustment of the lock
cams. The best position to start with is the bracket in the highest position. You can make further
adjustments once the cover is mounted. See
Page 4, Picture E .
Repeat steps A through E for the other side.
WARNING! Be sure not to over tighten the rear mounting bolts. Doing so could shear
off the bolt heads, creating a difficult procedure to remove the remaining thread.
FORM # IG2110HH
Modified Mar 2009
Page 3
Model 2110 Ford Explorer Sport Trac 2007-Current