CLASSFICATION
.
Installation Manual
MODEL
.
ENB-X2
DOCUMENT NO
.
BU No. 2
Hyundai Sonata In-Dash Navigation DIY Installation Guide
VERSION
.
1.4
PAGE
.
20
Information & Manual
Copyright © 2013 UNAVI USA, Inc. All rights reserved.
Date: 1/31/2013
(Images shown on this page may vary)
*Please check after installation when the radio unit is powered on*
Red LED lights on the circuit board will flash intermittently indicating data communication.
Please proceed with CAUTION when
inserting the ribbon cable into the Trip
Interface board.
DO NOT twist the cable as this may result
in a damaged board and/or the audio unit!
The Trip Interface board is designed to
communicate with either side of the pins.
Connecting the ribbon connector between the
Trip Interface board and the audio head unit:
- Lift up the lock on the Trip Interface board
- Gently slide in the ribbon cable (typically blue
end facing down)
until it can’t
slide in any further
- Push the lock down to secure the cable
